Garage door hardware is an essential component in any home. Installing tilt up garage door hardware can be a great way to add convenience and security to your home. In this guide, we will provide an overview of the installation process, so you can get started installing your garage door hardware.
The first step in installing tilt up garage door hardware is to determine the size and weight of the door. This information will help you choose the appropriate hardware. It is important to purchase hardware that is rated for the size and weight of the door.
Once you have the hardware, you will need to install the springs and rollers. The rollers should be mounted on the tracks and the springs should be attached to the wall. This will ensure that the door opens and closes properly. It is important to install the hardware correctly to ensure safety and proper operation.
After the hardware is installed, you will need to adjust the tension on the springs. This is done by adjusting the tension rods. The tension rods are located on the back of the door. They should be adjusted so that the door has enough tension to open and close properly.
Finally, the hardware should be tested before it is used. You should open and close the door several times to make sure that the hardware is working properly. You should also check the tension on the springs and rollers to make sure that they are working correctly. Once you are satisfied with the installation, you can enjoy the convenience and security that tilt up garage door hardware provides.
Related Posts