How To Reset Keypad For Chamberlain Garage Door Opener

How to Reset Keypad for Chamberlain Garage Door Opener

If you've lost or forgotten the PIN code for your Chamberlain garage door keypad, you can reset it to a new code. Here are the steps on how to do it:

Step 1: Locate the Reset Button

Locate the reset button on the keypad. It is usually a small, round button recessed into the keypad casing. On some models, the reset button may be hidden behind a rubber cover.

Step 2: Press and Hold the Reset Button

Press and hold down the reset button for about 5 seconds. The keypad will beep and the lights will flash.

Step 3: Enter the Default PIN Code

Once the keypad beeps, enter the default PIN code. The default PIN code for Chamberlain garage door openers is usually "1234".

Step 4: Create a New PIN Code

After entering the default PIN code, you can now create a new PIN code by pressing the number keys on the keypad. Your new PIN code can be any 4-digit number.

Step 5: Confirm the New PIN Code

Once you have entered your new PIN code, you need to confirm it by pressing the "#" key.

Step 6: Save the New PIN Code

The keypad will beep and the lights will flash again to indicate that the new PIN code has been saved.

Tips:

If you have multiple keypads for your garage door, you need to reset each keypad individually.
If you forget your new PIN code, you can always reset the keypad again by following the steps above.
It is recommended to choose a PIN code that is easy to remember but difficult for others to guess.

Troubleshooting:

If the keypad does not beep or flash when you press the reset button, check if the batteries are low. Replace the batteries and try again.
If the keypad is beeping rapidly and the lights are flashing, it may be in programming mode. Exit programming mode by pressing the "#" key.
If you are still having trouble resetting the keypad, consult the user manual for your specific Chamberlain garage door opener model.