How To Install An Exterior Door In A Garage

How to Install an Exterior Door in a Garage

Installing an exterior door in a garage can be a great way to improve access to your home, provide additional ventilation, or add a touch of style. While it may seem like a daunting task, with the right tools and some careful planning, it can be completed in a weekend. Here's a step-by-step guide to help you install an exterior door in your garage:

Materials you'll need:

Exterior door with frame
Drill
Screws
Caulk
Level
Measuring tape
Jigsaw or circular saw
Safety glasses

Step 1: Prepare the Opening

Measure the rough opening in your garage wall where you want to install the door. Make sure the opening is square and plumb. If it's not, you may need to adjust the framing to make it so.

Step 2: Install the Door Frame

Place the door frame in the opening and align it so that it's level and plumb. Secure the frame to the studs with screws. Make sure the screws are long enough to penetrate the studs by at least 1 inch.

Step 3: Install the Door

Lift the door into the frame and align it so that it's centered in the opening. Secure the door to the frame with screws. Make sure the screws are long enough to penetrate the frame by at least 1 inch.

Step 4: Seal the Door

Apply a bead of caulk around the perimeter of the door frame where it meets the wall. This will help to seal out air and water.

Step 5: Install the Hardware

Install the door handle, lock, and any other hardware to the door. Make sure to follow the manufacturer's instructions for installation.

Step 6: Test the Door

Open and close the door to make sure it operates smoothly. Check to make sure that the door is aligned properly and that there are no gaps around the frame.

Congratulations! You have now successfully installed an exterior door in your garage.