How To Build A Hanging Bike Rack For Garage

How to Build a Hanging Bike Rack for Garage: A Step-by-Step Guide

Bicycles are a great way to get around, but they can also take up a lot of space. If you're looking for a way to store your bikes without taking up too much room, a hanging bike rack is a great option. Hanging bike racks are a great way to maximize space in your garage, shed, or basement. They allow you to store your bikes vertically, rather than horizontally, which can save you a lot of space. Plus, they're relatively easy to build yourself. ### Materials Needed: * 2x4 lumber (8 feet) * 1/2-inch plywood (2 feet x 4 feet) * 3/8-inch carriage bolts (4) * 3/8-inch washers (8) * 3/8-inch lock nuts (4) * 1-1/2-inch wood screws (8) * Sandpaper * Paint or sealant (optional) ### Tools Needed: * Saw * Drill * Sander * Wrench * Screwdriver * Tape measure * Level ### Instructions: 1.

Cut the 2x4s.

You will need to cut the following pieces: * 4 pieces that are 36 inches long * 2 pieces that are 24 inches long * 2 pieces that are 18 inches long 2.

Assemble the frame.

* Start by attaching the two 36-inch pieces to the two 24-inch pieces with 1-1/2-inch wood screws. Make sure the 36-inch pieces are flush with the top and bottom of the 24-inch pieces. * Next, attach the two 18-inch pieces to the top of the frame with 1-1/2-inch wood screws. Make sure the 18-inch pieces are flush with the front and back of the frame. 3.

Attach the plywood.

* Cut the plywood to size so that it fits inside the frame. * Attach the plywood to the frame with 1-1/2-inch wood screws. Make sure the screws are countersunk so that they don't stick out. 4.

Add the carriage bolts.

* Drill four holes through the plywood and into the frame. The holes should be evenly spaced and about 6 inches apart. * Insert the carriage bolts through the holes and secure them with washers and lock nuts. 5.

Sand and paint or seal the rack.

* Sand the rack to remove any rough edges. * Paint or seal the rack to protect it from the elements. 6.

Hang the rack in your garage.

* Find a spot in your garage where you want to hang the rack. * Use a level to make sure the rack is level. * Attach the rack to the wall with screws or nails. ### Tips: * You can use any type of wood for this project, but 2x4s are a good option because they are strong and inexpensive. * If you want to make the rack more sturdy, you can add additional cross braces to the frame. * You can also add hooks to the rack to store other items, such as helmets and bike locks. * If you are storing multiple bikes on the rack, make sure to leave enough space between them so that you can easily remove them. With a little planning and effort, you can build a hanging bike rack that will help you save space and keep your garage organized.