How To Adjust Electric Eye On Garage Door Opener

By | December 2, 2024

How to Adjust the Electric Eye on a Garage Door Opener

The electric eye is a safety feature on your garage door opener that prevents the door from closing on people or objects. It is important to keep the electric eye aligned properly to ensure that it is working correctly. Here are the steps on how to adjust the electric eye on a garage door opener:

1. Locate the Electric Eye

The electric eye is typically located on the side of the garage door frame, about 6 inches from the ground. It consists of two small sensors, one that emits a beam of light and one that detects the beam.

2. Check the Alignment

With the garage door closed, stand in front of the electric eye and wave your hand or a small object between the two sensors. If the electric eye is aligned properly, the garage door will stop closing when the object breaks the beam of light.

3. Adjust the Sensors

If the electric eye is not aligned properly, you will need to adjust the sensors. The sensors are typically held in place by screws or clamps. Loosen the screws or clamps and move the sensors until the beam of light is aligned between the two sensors.

4. Tighten the Screws or Clamps

Once the sensors are aligned properly, tighten the screws or clamps to hold them in place. Test the electric eye again by waving your hand or a small object between the sensors. The garage door should stop closing when the object breaks the beam of light.

5. Test the Garage Door

Once the electric eye is aligned properly, test the garage door to make sure it is working correctly. Open and close the garage door several times to make sure that the electric eye is preventing the door from closing on people or objects.

Troubleshooting Tips

If you are having trouble adjusting the electric eye on your garage door opener, here are a few troubleshooting tips:

  • Make sure that the sensors are clean. Dirt or debris can block the beam of light and prevent the electric eye from working properly.
  • Check the wiring to the electric eye. Loose or damaged wires can prevent the electric eye from working properly.
  • Replace the sensors. If the sensors are damaged, they will need to be replaced.

If you are still having trouble adjusting the electric eye on your garage door opener, you should contact a qualified technician for assistance.


How To Align Garage Door Sensors 9

How To Align Garage Door Sensors 9 Steps With Pictures

How To Align Garage Door Sensors

How To Align Garage Door Sensors

How To Align Garage Door Sensors 9

How To Align Garage Door Sensors 9 Steps With Pictures

Liftmaster Garage Door Opener

How To Align The Safety Reversing Sensors On Your Liftmaster Garage Door Opener

How To Align Garage Door Sensors 9

How To Align Garage Door Sensors 9 Steps With Pictures

Garage Door Safety Sensors Out Of

Garage Door Safety Sensors Out Of Alignment Easy Fix

How To Align Your Garage Door Sensors

How To Align Your Garage Door Sensors Cornwell

How To Align Garage Door Sensors 9

How To Align Garage Door Sensors 9 Steps With Pictures

Garage Door When The Sun Is Shining

3 Ways To Shut A Garage Door When The Sun Is Shining On Electronic Eyes

Danleys

Danleys


Leave a Reply

Your email address will not be published. Required fields are marked *